Order the Diamond Pier Driving Bit

The Diamond Pier driving bit is recommended for use with a standard breaker/demolition hammer. The driving bit has a 1-1/8" hex shaft.

NOTE: The bits are NOT to be used with, or as, a sledgehammer.

Diamond Pier Driving Bit      Works with Diamond Pier Models DP-50, 
      DP-75 and DP-100.

      For use with breaker hammers that accept 
      a 1-1/8" hex shaft.

cards
Powered by paypal

Are you ready to build beyond the standard?

Let us know what you’re working on.

Copyright Ⓒ 2025 Pin Foundations, Inc. All Rights Reserved.  All images and information contained herein are the property of Pin Foundations, Inc. and may not be copied or reproduced without express written consent from PFI or its affiliates.